
ServicesScreen Cleaning & Repair
Window Screen Cleaning & Repair in Harleyville
We take each screen down, look it over in good light and tell you plainly what we see: dirt that washes out, mesh that needs rescreening, or a frame that is past saving. Then we clean or repair only what needs it and set every screen back snug.
Clean screens let the light and the breeze back in
A screen collects more than most people expect. Pollen, dust, cobwebs and the fine grit that blows off a driveway settle into the mesh and dull the view through even a freshly washed window. Over time that film holds moisture, feeds mildew and makes the mesh brittle.
Our window screen cleaning and repair starts with an inspection, not a sales pitch. We check the mesh, the spline that holds it, the frame corners and the fit in the opening. You hear what we found in plain terms, and you decide what gets done. Many screens only need a careful wash. Some need new mesh. A few need a new frame, and we will tell you when that is the honest answer.
We are a licensed and bonded company with full coverage on every job, and we treat your screens as part of the finish of the house. They come back clean, tight and seated properly, so they look right from the curb and work right from inside.
What the work includes
- Removal and labeling
- We take screens out one at a time and mark where each came from. Screens that look identical often differ by a fraction of an inch, and that keeps every one going back to its own window.
- Hand washing with soft brushes
- Each screen is washed with a mild solution and a soft brush on both sides, then rinsed gently. We avoid high pressure, which can stretch fiberglass mesh and pop the spline out of its channel.
- Mesh and spline inspection
- While the screen is clean and wet, small tears, pinholes and loose spline are easy to see. We set aside anything that needs attention and show it to you before doing more.
- Rescreening
- Torn or sagging mesh is cut out, the channel is cleaned, and new mesh is rolled in with fresh spline so it sits flat and tight. We talk with you about mesh type before we start.
- Frame and fit adjustments
- Bent frames are straightened where the metal allows, and loose corners or worn tension springs are addressed so the screen seats firmly without rattling.
Signs your screens need attention
A gray haze on the view
If the glass is clean but the view still looks dim, the mesh is usually holding a layer of dust and pollen.
Dark spots or mildew
Black or green speckling on the mesh or frame means moisture has been sitting there. Humid summers make this common, and it spreads if left alone.
Tears, holes or pulled corners
Even a small tear lets insects in and tends to grow. Pets and storm debris are frequent causes.
Sagging or rippled mesh
Mesh that bellies out has usually lost tension at the spline. Rescreening restores a flat, tight surface.
Screens that rattle or fall out
A loose fit points to a bent frame or worn springs, and it is worth fixing before the screen blows out in a gust.
How a screen visit runs
- 1
A conversation by phone
You tell us how many screens you have and what you have noticed. We ask a few questions about access and the type of windows so we arrive prepared.
- 2
Inspection on site
We remove and label the screens, then look at each one closely. You get a plain account of which ones need a wash, which need new mesh and which, if any, need a new frame.
- 3
Cleaning and repair
With your go-ahead, we wash every screen and complete the agreed repairs. Work is done outside on a protected surface, and we keep walkways clear.
- 4
Refit and walkthrough
Each screen goes back in its own window, checked for a snug fit. We walk you around the house so you can see the results, then clean up and leave nothing behind.

What shapes the price of screen work
We look at your screens before we quote, because two houses with the same count can need very different work. A set that only wants washing is a lighter job than a handful that need new mesh. Before we touch a single repair, you hear what each screen needs and how that adds up.
- How many screens, and how big
- Each screen has to come down, get washed and go back in, so the total count sets the baseline. Wide openings and sliding door screens are heavier and more awkward to handle than a typical window screen.
- A wash versus new mesh
- Washing is a short step per screen. Rescreening means pulling the old mesh and spline, cleaning the channel and rolling in new material, which adds labor and parts to every screen that needs it.
- The mesh you choose
- Standard fiberglass, sturdier pet-resistant mesh and solar screen fabric are priced differently. We describe how each holds up over time so the choice is yours to make with clear eyes.
- Reach and how stuck they are
- Upper-floor screens, shrubs crowding the windows and frames painted shut all slow the removal. We take that extra time so nothing bends or cracks on the way out.
Screen cleaning and repair questions
Something not covered here? (843) 428-8295
Do you take every screen off, or clean them in place?
We take them off. Cleaning in place leaves grit in the frame and the track, and you cannot see damage properly. Removal also lets us wash the glass and sill behind it if you have booked residential window cleaning or window track and sill cleaning on the same visit.
Will you tell me if a screen is not worth repairing?
Yes. If a frame is badly bent, corroded or cracked at the corners, new mesh will not make it fit well. We show you the problem and explain the choice, and you decide.
What kind of mesh do you use for rescreening?
Most homes do well with standard fiberglass mesh, which is flexible and does not dent. If you have pets that push on screens, a heavier pet-resistant mesh lasts longer. We go over the options when we inspect.
Is there a guarantee on this work?
When we clean your windows along with the screens, that window cleaning is backed by our 7-day rain guarantee. For screen repairs, we check each one for fit and tension with you before we leave, so any concern gets handled while we are still there.
Do you work outside Harleyville?
Yes. We also serve nearby towns including Summerville, Ridgeville-area neighbors in Sangaree, Ladson, Goose Creek, Moncks Corner, Walterboro and Wyboo. Give us a call and we will confirm your address is in our area.

Find out what your screens really need
A short call is the first step. We will ask about your screens, set a time to inspect them, and give you a straight answer on cleaning or repair.